Dear Customer,
the following article is useful and valuable for you to know how to maintain industrial CCD camera and how to Clean CCD industrial Camera.
First of all, when the product is bought back, you should read the instruction manual first, and then operate according to the instruction. Random operation can easily cause damage to the product, or even damage it.
After the product has been used for a period of time, maintenance should be carried out, and it cannot be used indefinitely, which will easily reduce the function and life of the product. Among them, the daily maintenance of industrial cameras is also very important, and the correct maintenance method is a necessary means to ensure quality.
1. Suction suction method: This method uses the suction power of a turbine or piston vacuum pump to absorb dust on the surface of the industrial camera CCD. The working principle is the same as that of the vacuum cleaner used in our family. Therefore, its advantages and disadvantages It is also consistent. The advantage of this method is that it does not contact dust and does not damage the CCD; the disadvantage is that this method only has the effect of sucking dry floating dust, but it is not very effective for dust and oil stains with adhesion.
2. Electrostatic adsorption method: This method uses static soft bristles to adsorb dust on the surface of the CCD of an industrial camera. This method is the same as the suction method and has the same advantages and disadvantages. When choosing which method to use, the main one depends on The tools are easy to obtain.
3. Fiber cleaning method: This is a method that uses a soft microfiber material, dips it in a functional cleaning solution, and goes deep into the CCD for cleaning. The active cleaning solution mentioned here is preferably pure alcohol with a concentration of more than 90%. Do not use isopropyl alcohol. Isopropyl alcohol can absorb moisture in the air and will easily leave liquid traces on the surface of the industrial camera CCD during cleaning; also do not use Methanol, methanol is a highly toxic substance. The advantages of this method are no damage, easy operation, targeted removal, and a certain effect on oily dust. The disadvantage is that if this method is used improperly, it is easy to clear and dirty, which is counterproductive.
4. Sticky dust method: This method uses rubber rods or low-viscosity adhesive paper to stick the dust on the CCD surface of the industrial camera. This method is simple to operate, but the effect is general. It is easy to leave offset prints that are more difficult to clean after cleaning, causing secondary pollution. Therefore, this method is not recommended.
Vehviscam manufacture limited provides fixed and zoom industrial lens with a variety of specifications for various CCD industrial Camera, focal lengths and chip sizes, and can tailor industrial lenses that meet customer needs.
